Low Pressure Filters
Pi 150
Pi 150
Application: The electrical indicator function can be changed from the Normally Open position to the Normally Closed position or vice versa by inverting the electrical section.
Technical Data
- Design
- In-line filter, threaded or flanged SAE 4-bolt
- Nominal pressure
- 10bar to 25 bar
- Flow rate
- 350 / 630 l/min
- Temperature range
- -10°C to +120°C
- (other temperature ranges on request)
- Bypass setting
- Δρ 3.5 bar ±10%
- Material
- Filter head
- Gadolinium aluminium
- Filter bowl
- Steel
- Seal
- NBR
- Indicator / switch setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
The electrical indicator function can be changed from the Normally Open position to the Normally Closed position or vice versa by inverting the electrical section.
Inductivity in the direct current may require the use of a signal eraser.
For further information please see our Contamination Indicators
Filters compatible with standard mineral oils.
Please contact us when other fluids apply.
Housings with nominal pressure 10 bar are fitted standard with an air bleeder valve, housings with nominal pressure 25 bar with a venting screw.
Features
- Modular and compact design
- Minimal pressure drop
- Visual / electrical contamination control
- Highly efficient Mic or PS filter elements
- Beta-rated elements per ISO 4572
- Large dirt-holding capacity and high differential pressure stability providing optimum element service life
Line Filter Pi 1907
Pi 150
Technical Data
- Design
- In-line filter, flanged (DIN 2632, DIN 2633)
- Nominal pressure
- 10 / 16 bar
- Flow rate (l /min)
-
400 630 800 1250 1800 3500 6000 - Line size (mm)
-
50 65 80 100 125 150 200 - Temperature range
- -10°C to +100°C
- (other temperature ranges on request)
- Material
- Filter housing
- Steel welded construction
- Seal
- NBR
- Bypass setting
- Δρ 3.5 bar ±10%
- Indicator setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
Features
- Modular and compact design
- Minimal pressure drop
- Visual / electrical contamination control
- Equipped with highly efficient glass fibre PS filter element
- Beta-rated elements according to ISO 16889 multipass test
- Elements with high differential pressure stability and dirt-holding capacity
Pi 200
Pi 200
Technical Data
- Design
- In-line filter, threaded
- Operating pressure
- 25 / 60 bar
- Flow rate
- Up to 450 l/min
- Temperature range
- -10°C to +120°C
- (other temperature ranges on request)
- Bypass setting
- Δρ 3.5 bar ±10%
- Material
- Filter head
- Gadolinium aluminium
- Filter bowl
- Aluminium
- Steel
- Seal
- NBR
- Aluminium
- Indicator setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
Features
- Modular and compact design
- Visual / electrical contamination control
- Highly efficient PS filter elements
- Beta-rated elements per ISO 4572
- Large dirt-holding capacity and high differential pressure stability providing optimum element service life
Pi 220
Pi 220
Technical Data
- Design
- In-line filter, threaded
- Nominal pressure
- 10 / 25 bar
- Flow rate
- Up to 160 l/min
- Temperature range
- -10°C to +120°C
- (other temperature ranges on request)
- Bypass setting
- Pressure side Δρ 3.5 bar
- Suction side Δρ 0.25 bar
- Material Filter head
- Gadolinium aluminium
- Filter Spin-on-cartridge
- Steel
- Seal
- NBR
- Aluminium
- Indicator setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
The electrical indicator function can be changed from the Normally Open position to the Normally Closed position or vice versa by inverting the electrical section.
Inductivity in the direct current may require the use of a signal eraser.
For further information please see our Contamination Indicators
Spin-on cartridges are compatible with standard mineral oils.
Please contact us when other fluids apply.
Features
- Modular and compact design
- Minimal pressure drop
- Visual / electrical contamination control
- Highly efficient Mic or PS filter elements
- Beta-rated elements per ISO 4572
- Large dirt-holding capacity and high differential pressure stability providing optimum element service life
Pi 230
Pi 230
Technical Data
- Design
- In-line filter
- Nominal pressure
- 25 / 40 bar (360 / 570 psi)
- Temperature range
- -10°C to +120°C
- (other temperature ranges on request)
- Bypass setting
- Δρ 3.5 bar ±10%
- Filter head & cap
- Gadolinium aluminium
- Material Filter housing
- Aluminium
- Material Filter Seal
- NBR
- Indicator setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
The electrical indicator function can be changed from the Normally Open position to the Normally Closed position or vice versa by inverting the electrical section.
Features
- Modular and compact design
- Minimal pressure drop
- Visual / electrical contamination control
- Equipped with highly efficient glass fibre PS filter elements
- Highly efficient Mic or PS filter elements
- Beta rated elements according to ISO 16889 multipass test
- Elements with high differential pressure stability and dirt-holding capacity
Pi 270
Pi 270
Technical Data
- Design
- In-line filter, threaded, 1½ inch BSP
- Operating pressure
- 10 / 25 bar
- Flow Rate
- Up to 300 l/min
- Temperature range
- -10°C to +120°C
- (other temperature ranges on request)
- Bypass setting
- Pressure side Δρ 3.5 bar ±10%
- Suction side Δρ 0.25 bar ±10%
- Material Filter head
- Gadolinium aluminium
- Filter Spin-on-cartridge
- Steel
- Material Filter Seal
- Aluminium
- NBR
- Indicator setting
- Δρ 2.2 bar ±10%
- Electrical specifications of pressure indicator
- Current load
- 1 A
- Contact load
- 70 W
- Voltage
- 230 V AC
- Type of protection
- IP 65
- Contact
- Normally open / normally closed
The electrical indicator function can be changed from the Normally Open position to the Normally Closed position or vice versa by inverting the electrical section.
Inductivity in the direct current may require the use of a signal eraser.
For further information please see our Contamination Indicators
Spin-on cartridges are compatible with standard mineral oils.
Please contact us when other fluids apply.
Features
- Modular and compact design
- Minimal pressure drop
- Visual / electrical contamination control
- Highly efficient Mic or PS filter elements
- Beta-rated elements per ISO 4572
- Large dirt-holding capacity and high differential pressure stability providing optimum element service life